BSWVB - GALDEN HT-90
- MSDS: BSWVB
- Manufacturer: RUSIMONT USA INC
- Product Name: GALDEN HT-90
- National Stock Number: 9150-00N047947
Product Identification
Product ID:GALDEN HT-90
MSDS Date:09/15/1993
FSC:9150
NIIN:00N047947
MSDS Number: BSWVB
Responsible Party
MORRISTOWN, NJ 07962
US
Emergency Phone: 201-282-6250
Info Phone: 201-282-6250
Cage: 0AFR3
Contractor
Telephone: 609-853-8119
Cage: 0AFR3
Ingredients
PROPENE 1,1,2,3,3, HEXAFLUORO, OXIDIZED, POLYMERIZED
CAS: 69991-67-9
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE KNOWN
Medical Cond Aggravated by Exposure:NONE KNOWN
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . EYES:CLEAN & WASH W/WATER FOR AT LEAST 15 MINUTES.
SKIN:CLEAN & WASH W/WATER & SOAP. INGEST:GET MEDICAL HELP.
Fire Fighting
Flash Point:NON FLAMMABLE
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . KEEP CONTAINERS COOL BY SPRAYING W/WATER WHEN EXPOSED
TO FIRE.
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION CAN RESULT IN
GENERATION OF TOXIC FUMES.
Accidental Release
Spill Release Procedures:ELIMINATE FREE FLAMES FROM THE AREA; STOP LEAK
& ABSORB THE LIQUID W/SAND & DISPOSE OF PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:FOR PACKAGING & TRANSPORT, USE EITHER
BOTTLES OR DRUMS OF GLASS OR POLYETHYLENE; DO NOT STORE NEAR
FLAMMABLE OR EXPLOSIVE MATERIALS.
Other Precautions:KEEP AWAY FROM FIRE, HEAT SOURCES OR HOT SURFACES; DO
NOT SMOKE IN WORKING AREAS. AVOID CONTAMINATION OF SMOKING
PRODUCTS.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:NOT REQUIRED, FOLLOW INTERNAL AREA
REQUIREMENTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:196F,91C
Vapor Pres:68 @ 25C
Spec Gravity:1.7
Solubility in Water:15 PPM
Appearance and Odor:CLEAR LIQUID; NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OR NON-AQUEOUS ALKALI & LEWIS ACIDS >100C.
Stability Condition to Avoid:AVOID HEATING >290C.
Hazardous Decomposition Products:HF & COF*2 FROM THERMAL DECOMPOSITION
IN AIR (BOTH TOXIC).
Disposal
Waste Disposal Methods:USE HIGH TEMPERATURE INCINERATION IN SPECIAL
EQUIPMENT I/A/W LOCAL, STATE & FEDERAL LAWS & REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.